1. Installation

To install from CRAN, use

install.packages("formatR")

To install the latest development version, use

install.packages("formatR", repos = "http://rforge.net")

Or check out the Github repository and install from source if you know what this means.

This page is always based on the development version.

2. Reformat R code

The formatR package was designed to reformat R code to improve readability; the main workhorse is the function tidy.source(). Features include:

long lines of code and comments are reorganized into appropriately shorter ones
spaces and indent are added where necessary
comments are preserved in most cases
the number of spaces to indent the code (i.e. tab width) can be specified (default is 4)
an else statement in a separate line without the leading } will be moved one line back
= as an assignment operator can be replaced with <-
the left brace { can be moved to a new line

Below is an example of what tidy.source() can do. The source code is:

## comments are retained;
# a comment block will be reflowed if it contains long comments;
#' roxygen comments will not be wrapped in any case
1+1

if(TRUE){
x=1  # inline comments
}else{
x=2;print('Oh no... ask the right bracket to go away!')}
1*3 # one space before this comment will become two!
2+2+2    # only 'single quotes' are allowed in comments

lm(y~x1+x2, data=data.frame(y=rnorm(100),x1=rnorm(100),x2=rnorm(100)))  ### a linear model
1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1  ## comments after a long line
## here is a long long long long long long long long long long long long long comment which will be wrapped

We can copy the above code to clipboard, and type tidy.source(width.cutoff = 70) to get:

## comments are retained; a comment block will be reflowed if it
## contains long comments;
#' roxygen comments will not be wrapped in any case
1 + 1

if (TRUE) {
    x = 1  # inline comments
} else {
    x = 2
    print("Oh no... ask the right bracket to go away!")
}
1 * 3  # one space before this comment will become two!
2 + 2 + 2  # only 'single quotes' are allowed in comments

lm(y ~ x1 + x2, data = data.frame(y = rnorm(100), x1 = rnorm(100), x2 = rnorm(100)))  ### a linear model
1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 
    1 + 1 + 1 + 1 + 1  ## comments after a long line
## here is a long long long long long long long long long long long long
## long comment which will be wrapped

Two applications of tidy.source():

tidy.dir() can reformat all R scripts under a directory

usage() can reformat the usage of a function, e.g. compare usage() with the default output of args():

library(formatR)
usage(glm, width = 70)  # can set arbitrary width here

## glm(formula, family = gaussian, data, weights, subset, na.action, start = NULL, 
##     etastart, mustart, offset, control = list(...), model = TRUE, method = "glm.fit", 
##     x = FALSE, y = TRUE, contrasts = NULL, ...)

args(glm)

## function (formula, family = gaussian, data, weights, subset, 
##     na.action, start = NULL, etastart, mustart, offset, control = list(...), 
##     model = TRUE, method = "glm.fit", x = FALSE, y = TRUE, contrasts = NULL, 
##     ...) 
## NULL

3. The Graphical User Interface

If one of the gWidgets packages has been installed (e.g. gWidgetsRGtk2), the function tidy.gui() can pop up a GUI to reformat R code like this:

library(gWidgetsRGtk2)
library(formatR)
tidy.gui()

After hitting the Convert button:

4. Evaluate the code and mask output in comments

It is often a pain when trying to copy R code from other people's code which has been run in R and the prompt characters (usually >) are attached in the beginning of code, because we have to remove all the prompts > and + manually before we are able to run the code. However, it will be convenient for the reader to understand the code if the output of the code can be attached. This motivates the function tidy.eval(), which uses tidy.source() to reformat the source code, evaluates the code in chunks, and attaches the output of each chunk as comments which will not actually break the original source code. Here is an example:

tidy.eval(text = c("a<-1+1;a  # print the value", "matrix(rnorm(10),5)"))

a <- 1 + 1
a  # print the value
## [1] 2

matrix(rnorm(10), 5)
##          [,1]    [,2]
## [1,] -2.21384  0.8302
## [2,] -0.00399 -0.1724
## [3,]  0.20268  0.6513
## [4,]  0.15910 -2.1961
## [5,] -0.69755 -0.8588

The default source of the code is from clipboard like tidy.source(), so we can copy our code to clipboard, and simply run this in R:

library(formatR)
tidy.eval()  # without specifying any arguments, it reads code from clipboard

5. Showcase

We continue the example code in Section 2, using different arguments in tidy.source() such as replace.assign, keep.blank.line, reindent.spaces, left.brace.newline and keep.comment, etc.

Replace `=` with `<-`

if (TRUE) {
    x <- 1  # inline comments
} else {
    x <- 2
    print("Oh no... ask the right bracket to go away!")
}

Discard blank lines

Note the 5th line (an empty line) was discarded:

## comments are retained; a comment block will be reflowed if it contains
## long comments;
#' roxygen comments will not be wrapped in any case
1 + 1
if (TRUE) {
    x = 1  # inline comments
} else {
    x = 2
    print("Oh no... ask the right bracket to go away!")
}
1 * 3  # one space before this comment will become two!

Reindent code (2 spaces instead of 4)

if (TRUE) {
  x = 1  # inline comments
} else {
  x = 2
  print("Oh no... ask the right bracket to go away!")
}

Move left braces `{` to new lines

if (TRUE)
{
    x = 1  # inline comments
} else
{
    x = 2
    print("Oh no... ask the right bracket to go away!")
}

Discard comments

1 + 1
if (TRUE) {
    x = 1
} else {
    x = 2
    print("Oh no... ask the right bracket to go away!")
}
1 * 3
2 + 2 + 2
lm(y ~ x1 + x2, data = data.frame(y = rnorm(100), x1 = rnorm(100), x2 = rnorm(100)))
1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 
    1 + 1 + 1 + 1

6. Further notes

The tricks used in this packages are very dirty. There might be dangers in using the functions in formatR. Please read the next section carefully to know exactly how comments are preserved. The best strategy to avoid failure is to put comments in complete lines or after complete R expressions. Below are some known issues that tidy.source() may fail.

In-line comments after an incomplete expression or ;

1 + 2 + ## comments after an incomplete line
    3 + 4
x <- ## this is not a complete expression
     5
x <- 1; # you should not use ; here!

It is not a good idea to interrupt R code with comments and sometimes it can be confusing – comments should come after a complete R expression naturally; by the way, tidy.source() will move the comments after { to the next line, e.g.

if (TRUE) {## comments
}

will become

if (TRUE) {
    ## comments
}

Inappropriate blank lines

Blank lines are often used to separate complete chunks of R code, and arbitrary blank lines may cause failures in tidy.source() as well when the argument keep.blank.line = TRUE, e.g.

if (TRUE)

{'this is a BAD style of R programming!'} else 'failure!'

There should not be a blank line after the if statement. Of course keep.blank.line = FALSE will not fail in this case.

`?` with comments

We can use the question mark (?) to view the help page, but formatR package is unable to correctly format the code using ? with comments, e.g.

?sd  # help on sd()

In this case, it is recommended to use the function help() instead of the short-hand version ?.

`->` with comments

We can also use the right arrow -> for assignment, e.g. 1:10 -> x. I believe this flexibility is worthless, and it is amazing that a language has three assignment operators: <-, = and -> (whereas almost all other languages uses = for assignment). Bad news for formatR is that it is unable to format code using both -> and comments in a line, e.g.

1:10 -> x  # assignment with right arrow

I recommend you to use <- or = consistently. What is more important is consistency. I always use = because it causes me no confusion (I do not believe it is ever possible for people to interpret fun(a = 1) as assigning 1 to a variable a instead of passing an argument value) and <- is more dangerous because it works everywhere (you might have unconsciously created a new variable a in fun(a <- 1); see an example here). The only disadvantage is that most R people use <- so it may be difficult to collaborate with other people.

7. How does `tidy.source()` actually work?

The method to preserve comments is to protect them as strings in R expressions. For example, there is a single line of comments in the source code:

  # asdf

It will be first masked as

invisible(".IDENTIFIER1  # asdf.IDENTIFIER2")

which is a legal R expression, so base::parse() can deal with it and will no longer remove the disguised comments. In the end the identifiers will be removed to restore the original comments, i.e. the strings invisible(".IDENTIFIER1 and .IDENTIFIER2") are replaced with empty strings.

Inline comments are handled differently: two spaces will be added before the hash symbol #, e.g.

1+1#  comments

will become

1+1  #  comments

Inline comments are first disguised as a weird operation with its preceding R code, which is essentially meaningless but syntactically correct! For example,

1+1 %InLiNe_IdEnTiFiEr% "#  comments"

then base::parse() will deal with this expression; again, the disguised comments will not be removed. In the end, inline comments will be freed as well (remove the operator %InLiNe_IdEnTiFiEr% and surrounding double quotes).

All these special treatments to comments are due to the fact that base::parse() and base::deparse() can tidy the R code at the price of dropping all the comments.

8. Global options

There are global options which can override some arguments in tidy.source():

argument	global option	default
`keep.comment`	`options('keep.comment')`	`TRUE`
`keep.blank.line`	`options('keep.blank.line')`	`TRUE`
`replace.assign`	`options('replace.assign')`	`FALSE`
`reindent.spaces`	`options('reindent.spaces')`	`4`
`left.brace.newline`	`options('left.brace.newline')`	`FALSE`

Also note that single lines of long comments will be wrapped into shorter ones automatically, but roxygen comments will not be wrapped (i.e., comments that begin with #').

9. Additional problems for R 2.15.x

You are strongly recommended to upgrade to R 3.0.x; if you use R < 3.0.0, you will suffer from a few additional problems below.

Character strings with # in the beginning of a line

mod = "1+1
## comments here can bring troubles
2+2"

We need to write like this:

mod = "1+1\n## comments here can bring troubles\n2+2"
## or
mod = paste("1+1", "## comments here can bring troubles", "2+2", sep = '\n')

Double quotes in comments

Note when keep.comment == TRUE, you must not write double quotes in the inline comments and must write literal # in double quotes!! For example,

1 + 1  # double quotes in "comment" are not allowed
1 + 1  # here is a legitimate 'comment' with single quotes

"a valid character string with # in it"
'a # in single quotes is not allowed'